Add example for a dimmable light. Based on a copy of color dimmable light example.

feat(zigbee): Add pressure, flow, ccupancy and carbon dioxide sensor

feat(matter): adds a new endpoint to Matter - On/Off Plugin (Power Relay)

Cap size of last chunk in raw read in WebServer

As suggested by code review

Tested on some of the popular S3 board bought from Amazon, the digitalRead of an INPUT pin is LOW, which stops the timer right after start.
Setting it to INPUT_PULLUP will fix it.

Zigbee: Add dimmable light endpoint class

Use INPUT_PULLUP instead of INPUT

…ault

…sages

Fixes: #10736

feat(matter): General Review - remove while(!serial)  ipv6(enable) and fixes some commentaries in the code

fix(clk_src): Fix error as APLL is not yet supported for P4

…11339)

* feat(zigbee): Add binary input and analog extension

* Apply suggestions from code review

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* feat(zigbee): Remove setBinaryInputReporting

* ci(pre-commit): Apply automatic fixes

---------

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>

* feat(zigbee): Add AC DC ElectricalMeasurement support

* ci(pre-commit): Apply automatic fixes

* ci(): fix precommit codespell

* ci(pre-commit): Add spaces between numbers and units

---------

Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>

…C and JTAG to USB-OTG (#11403)

* fix(board): Alfredo-NoU3 changed default upload mode from Hardware CDC and JTAG to USB-OTG

* feat(board): Add Alfredo NoU2

* Revert "feat(board): Add Alfredo NoU2"

This reverts commit 35ba26a.

* Update gen_esp32part.py

* change(tools): Push generated binaries to PR

* fix(formatting): Apply formatter

* change(tools): Push generated binaries to PR

* fix(gen_esp32part): Remove unnecessary generator

* change(tools): Push generated binaries to PR

* fix flake8 (#11393)

---------

Co-authored-by: Jason2866 <24528715+Jason2866@users.noreply.github.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>

* feat(zigbee): Check the type of leave signal

* Update libraries/Zigbee/src/ZigbeeCore.cpp

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* Update libraries/Zigbee/src/ZigbeeCore.cpp

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* ci(pre-commit): Apply automatic fixes

---------

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>

#11356)

* fix(build): Update APB frequency set routine

* IDF release/v5.4 aed8bdc8

* feat(codeowners): Initial CODEOWNERS setup

* fix(comment): Improve comment

* fix(codeowners): Add teams

* fix(codeowners): Apply suggestions

* fix(codeowners): Add missing libraries

HTTP 204 is a successful return code which indicates No Content. While it's appropriate to return a 304 if the server has content for a device but it hasn't change, it is more accurate for a server to return a 204 if it simply doesn't have any firmware files for a particular device.

Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>

* feat(ap): Add support for DHCP Captive Portal (opt 114)

* feat(ap): No need to guard the function

* ci(pre-commit): Apply automatic fixes

---------

Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* make code execution conditional from include esp_bt.h.h

* only one if

* Update esp32-hal-bt.c

…structures fix (#11425)

* feat(zigbee): Add endpoint identification in read handlers

* fix(zigbee): initialize Zigbee command structures with zeros

* fix(zigbee): Spelling correction

* ci(pre-commit): Apply automatic fixes

---------

Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* feat(zigbee): Add methot to set,get,report analog output

* fix(ci): Update json file for example

* fix(zigbee): Add missing keywords

* ci(pre-commit): Apply automatic fixes

---------

Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

add PSRAM Setting

fix: Updated the tools options for Geekble Mini

* update wifiduinov2&wifiduino32s3 boards setting

* fix wifiduinov2&wifiduino32s3 build board error.

* fix wifiduinov2(esp32c3) board setting

* fix wifiduinov2(esp32c3) cdc on boot default setting.

* fix wifiduino32s3 spi pin set

* change wifiduino32s3 spi pin to spi1

* remove 32Mb flash size

* ci(pre-commit): Apply automatic fixes

---------

Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* feat(p4): Add 32MB Flash Partitions to ESP32-P4

* feat(p4): Add 32MB flash size option

---------

Co-authored-by: Jan Procházka <90197375+P-R-O-C-H-Y@users.noreply.github.com>

* feat(zigbee): Support min max for Analog EP

* feat(zigbee): Use cfloat FLT_MAX

* ci(pre-commit): Apply automatic fixes

---------

Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

AsyncUDP::listenMulticast() properly receives packets sent to IPv4
multicast addresses like 239.1.2.3, but it is not receiving packets sent
to IPv6 multicast addresses like ff12::6ood:cafe.

The root cause is a bit hidden: listen(NULL, port) would match
AsyncUDP::listen(const ip_addr_t *addr, uint16_t port), which calls
_udp_bind(_pcb, addr, port), which uses the lwIP API to call
udp_bind(struct udp_pcb *pcb, const ip_addr_t *ipaddr, u16_t port) at
the end. If lwIP has LWIP_IPV4 enabled, it checks if ipaddr == NULL and
sets it to IP4_ADDR_ANY. So an IPv6 address is never bound.

This fix checks the IP address passed to AsyncUDP::listenMulticast(). If
it is an IPv6 address, it constructs and passes the IPv6 any address
(::); otherwise (IPv4), it constructs and passes the IPv4 any address
(0.0.0.0).

…ng (#11452)

* feat(ledc): Improve timer management with frequency/resolution matching

* fix(ci): Fix uninitialized timer variable warning

* Update cores/esp32/esp32-hal-ledc.c

Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>

* ci(pre-commit): Apply automatic fixes

---------

Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>
Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

* fix(release): Replace all assets with chinese mirrors

* feat(release): Add script to append "-cn" to versions

* docs(install): Add instructions for users in China

* made some fix to the ESP32 I2S simple tone example

* edit the I2S - simple tone example

* edit the I2S - simple tone example

* some edit

* edit comment

* edit

* edit

* ci(pre-commit): Apply automatic fixes

---------

Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

…11353)

Co-authored-by: Lucas Saavedra Vaz <32426024+lucasssvaz@users.noreply.github.com>

fix: Update Pin compatability

* feat(openthread): adds native api

* feat(openthread): adds source code to CMakeLists.txt

* ci(pre-commit): Apply automatic fixes

---------

Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>

…ection for multi-group (#11464)

* feat(ledc): Enhance LEDC auto channel/timer selection for multi-group support

* feat(ledc): Add Gamma Fade support

* fix(example): Update comments

* ci(pre-commit): Apply automatic fixes

---------

Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>